To connect your AlphaShield^® Home Edition to your Internet Connection and get 100% guaranteed security.

1. Connect power to the AlphaShield^® Home Edition. 
   Middle LED will turn RED. 

2. Connect "PC" port of the AlphaShield^® Home Edition to your computer using the cable provided in the box. 
   Left LED will turn RED/GREEN depending on the setting of the switch at the back of the AlphaShield^® Home Edition. 

3. Connect "Cable/DSL" port of the AlphaShield^® Home Edition to your modem using the cable provided with the MODEM. 
   Right  LED will turn RED/GREEN depending on the setting of the switch at the back of the AlphaShield^® Home Edition. 

4. Press the Blue (Connect) Button on top of the AlphaShield^® Home Edition. 
   All LEDs will turn GREEN.

Modes of Operation:

Operation in Manual Mode:
When the Manual Mode is selected, a connection session must be manually initiated by pressing the Connect button (Blue) on the AlphaShield^® Home Edition. Once the Connect button (Blue) is pressed, the Connect (Center) LED will illuminate green to indicate to the user that he or she is connected to the Internet or Network. After an inactivity period of 15 minutes, the AlphaShield^® Home Edition will disconnect and enter into a Logical Disconnect state. In order to reconnect, press the Connect button (Blue).
The Connect (Center) LED will always indicate the connection status of the AlphaShield^® Home Edition device.

Operation in Auto Mode:
When the Auto Mode is selected, a connection session must be initiated by pressing the Connect button (Blue).  The Connect (Center) LED will illuminate a solid green to indicate that the AlphaShield^® Home Edition is in a connected state.
The duration of the connection is infinite, regardless of user activity.  It is highly recommended that once the user has completed his or her Internet session, the Disconnect button (Grey) is manually pressed to cause a Logical Disconnect.

Operation in Lock Mode:
When the Lock Mode is selected, a connection session must be manually initiated by pressing the Connect button (Blue) on the AlphaShield^® Home Edition.  Once the Connect button (Blue) is pressed, the Connect (Center) LED will illuminate green to indicate to the user that he or she is connected to the Internet or Network. After an inactivity period of 15 minutes, the AlphaShield^® Home Edition will disconnect and enter into a Physical Disconnect state. In order to reconnect, press the Connect button (Blue).

NOTE: Physical disconnection may result in your computer releasing the IP Address assignment.
The Connect (Center) LED will always indicate the connection status of the the AlphaShield^® Home Edition device.

 If you are still experiencing problems with connecting to the Internet, If you are still experiencing problems with connecting to the Internet, please contact us toll free at 1-866-722-3638